SearchSkip Search
main page contentSkip main page content

Naval & Submarine

MT-809520/S
6-18 GHz CONSTANT BEAMWIDTH HORN
ELECTRICAL
FREQUENCY RANGE 6 -18 GHz
PEAK GAIN 9 dBi (min)
GAIN @ ±15º AZIMUTH 6.0 dBi
SECOND CROSS OVER (@ ±30º) * 12 ±3dB below peak
PEAK GAIN TRACKING 2dB
MONOPOLES GAIN TRACKING * The mono pulse gain tracking of all the element pairs do not deviate by more than 2 dB from the mean
VSWR 2.5 : 1 max (90% OF BAND)
3.5 : 1 max (100% OF BAND)
POLARIZATION 45º SLANT
3dB ELEVATION BEAMWIDTH ≥30º @ a min. gain of 8 dBi
3dB AZIMUTH BEAMWIDTH 30º ±2º (90% of band)
30º ±3º (100% of band)
POWER 10W (CW)
INPUT IMPEDANCE 50 (ohm)
MECHANICAL
DIMENSIONS (LxWxD) 184 x 133 x 70 mm(max)
CONNECTOR SMA - Female
WEIGHT 450 gr (max)
COLOR Polyurethane GRAY 26373 Per FED-STD-595
OUTLINE DRAWING RD43074200M
ENVIRONMENTAL
STORAGE LIFE -20ºC to +71ºC with 95% RH
HIGH TEMPERATURE +85ºC
LOW TEMPERATURE -54ºC
SHOCK Per MIL-STD-810D, Method 516.3, Procedure I & V.
THERMAL SHOCK operation- Per MIL-STD-810D, Method 503.2, Paragraph 3.2.5.4 (-54ºC to +85ºC)<BR>non - operat
VIBRATION Per MIL-STD-810D, Method 514.3, Proc. I, Category 4, paragraph 3.2.5.9.<BR>Li=1.26g2/Hz, F1, F2=2*F2, F3=3*F1, F4=4*F1
HUMIDITY Per MIL-STD-810D, Method 507.2, Proc. I (“Constant High Humidity”)
ALTITUDE: OPERATING Per MIL-STD-810D, Method 504.1. Proc. I Category 7 up to 40,000 ft.
ACCELARATION Structural - Per MIL-STD-810F Method 513.5 Procedure I, values per table 513.5-I
crash safety - Per MIL-STD-810F Method 513.5 Procedure III, values per table 513.5-III
FUNGUS Per MIL-STD-810D, Method 508.3
EXPLOSIVE ATMPOSPHERE Per MIL-STD-810D, Method 511.2, Proc. I
SALT FOG Per MIL-STD-810D, Method 509.2, Proc. I

* Applicable only in circular array of horn.

 

Elevation Radiation Pattern Midband

Freq. 12 GHz

 
 

  

 

WAIVER!

While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print
Antenna SearchSkip Antenna Search

Find Antenna

Choose Frequency

Find Military Product

Choose Frequency
Jump to page content