Directional (CPE) Antennas
MT-262002/N/A
902-928 MHz 8dBi V/H POLARITY DIRECTIONAL ANTENNA |
|
.jpg)
|
| ELECTRICAL |
| REGULATORY COMPLIANCE |
RoHS, CE 0682
|
| FREQUENCY RANGE |
902 - 928 MHz
|
| GAIN |
8 dBi (min)
|
| VSWR |
1.7 : 1 (max)
|
| POLARIZATION |
Linear (Vertical or Horizontal)
|
| 3 dB BEAMWIDTH |
70°(typ)
|
| F/B RATIO |
-11dB (max)
|
| CROSS POLARIZATION |
-14dB (max)
|
| POWER |
6W (max)
|
| INPUT IMPEDANCE |
50 (ohm)
|
| LIGHTNING PROTECTION |
DC Grounded
|
| MECHANICAL |
| DIMENSIONS (LxWxD) |
190 x 190 x 30mm (max)
|
| CONNECTOR |
N-Type Female
|
| WEIGHT |
0.7 kg (max)
|
| MOUNTING KIT |
120018/A
|
| RADOME MATERIAL |
Plastic
|
| BASE PLATE MATERIAL |
Aluminum with chemical conversion coating
|
| OUTLINE DRAWING |
See Below
|
|
| ENVIRONMENTAL |
| TEST |
STANDARD |
DURATION |
TEMPERTURE |
NOTES |
| LOW TEMPERATURE |
IEC 68-2-1 |
72 h |
-55°C |
|
| HIGH TEMPERATURE |
IEC 68-2-2 |
72 h |
+71°C |
|
| TEMP. CYCLING |
IEC 68-2-14 |
1 h |
-45°C +70°C |
3 Cycles |
| VIBRATION |
IEC 60721-3-4 |
30 min/axis |
|
Random4M3 |
| SHOCK MECHANICAL |
IEC 60721-3-4 |
|
|
4M3 |
| HUMIDITY |
ETSI EN300-2-4 T4.1E |
144 h |
|
95% |
| WATER TIGHTNESS |
IEC 529 |
|
|
IP67 |
| SOLAR RADIATION |
ASTAM G53 |
1000h |
|
|
| FLAMMABILITY |
UL 94 |
|
|
Class HB |
| SALT SPRAY |
IEC 68-2-11 Ka |
500h |
|
|
| ICE AND SNOW |
|
|
|
25mm Radial |
| WIND SPEED SURVIVAL OPERATION |
|
|
|
220 Km/h
160 Km/h |
Existing Antenna Versions
| MT-262002/N/A |
With N – Type Female connector DC grounding |
| MT-262002/N |
With N – Type Female connector without DC grounding |
|
|
Azimuth Radiation Pattern Midband
Freq. 0.915 GHz |
Elevation Radiation Pattern Midband
Freq. 0.915 GHz |
|
|
| |
WAIVER!
While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists. |
Print
|
.jpg)
.jpg)
.jpg)
