Directional (CPE) Antennas
MT-223003/N
698-746 MHz 10.5dBi LINEAR V/H POLARITY DIRECTIONAL ANTENNA |
|
.jpg)
|
| ELECTRICAL |
| REGULATORY COMPLIANCE |
RoHS, CE 0682
|
| FREQUENCY RANGE |
698-746 MHz
|
| GAIN |
10.5 dBi (min)
|
| VSWR |
2 : 1 (max)
|
| POLARIZATION |
Linear (Vertical or Horizontal)
|
| 3dB ELEVATION BEAMWIDTH |
55°(typ)
|
| 3dB AZIMUTH BEAMWIDTH |
45°(typ)
|
| SIDELOBES LEVEL @ ± 90º |
-16 dB (max)
|
| SIDELOBES LEVEL @ ±90º AND FRONT TO BACK |
-10.5 dB (max)
|
| F/B RATIO |
-22dB (max)
|
| CROSS POLARIZATION ELEVATION |
-26dB (max)
|
| CROSS POLARIZATION AZIMUTH |
-32dB (max)
|
| POWER |
6W (max)
|
| INPUT IMPEDANCE |
50 (ohm)
|
| LIGHTNING PROTECTION |
DC Grounded
|
| MECHANICAL |
| DIMENSIONS (LxWxD) |
450x450x30mm (max)
|
| CONNECTOR |
N-Type Female
|
| WEIGHT |
3(kg) (max)
|
| RADOME MATERIAL |
Plastic
|
| BASE PLATE MATERIAL |
Aluminum with chemical conversion coating
|
| OUTLINE DRAWING |
See Below
|
|
| ENVIRONMENTAL |
| TEST |
STANDARD |
DURATION |
TEMPERTURE |
NOTES |
| LOW TEMPERATURE |
IEC 68-2-1 |
72 h |
-55°C |
|
| HIGH TEMPERATURE |
IEC 68-2-2 |
72 h |
+71°C |
|
| TEMP. CYCLING |
IEC 68-2-14 |
1 h |
-45°C +70°C |
3 Cycles |
| VIBRATION |
IEC 60721-3-4 |
30 min/axis |
|
Random4M5 |
| SHOCK MECHANICAL |
IEC 60721-3-4 |
|
|
4M5 |
| HUMIDITY |
ETSI EN300-2-4 T4.1E |
144 h |
|
95% |
| WATER TIGHTNESS |
IEC 529 |
|
|
IP67 |
| SOLAR RADIATION |
ASTAM G53 |
1000h |
|
|
| FLAMMABILITY |
UL 94 |
|
|
Class HB |
| SALT SPRAY |
IEC 68-2-11 Ka |
500h |
|
|
| ICE AND SNOW |
|
|
|
25mm Radial |
| WIND SPEED SURVIVAL OPERATION |
|
|
|
220 Km/h
160 Km/h |
|
WIND LOAD (SURVIVAL)
FRONT THRUST
SIDE THRUST |
|
|
|
39.6 kg
4.3 kg |
Existing Antenna Versions
| MT-223003/N |
With N – Type Female connector & DC grounding |
|
|
Azimuth Radiation Pattern Midband
Freq. 0.698 GHz |
Elevation Radiation Pattern Midband
Freq. 0.698 GHz |
|
|
| |
WAIVER!
While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists. |
Print
|
.jpg)
.jpg)
.jpg)
